RIOT 250R Pro Racing Drone
See above drop-down menu for all 4 variants of the RIOT package
A perfect addition to the Discover Drones lineup. The RIOT pushes you from drone student to drone master.
- H Frame with a 250mm wheel base
- Special attention to CG for X, Y and Z axis
- Mid mount battery location with high quality battery strap minimizes battery ejections
- FPV and Flight system protection
- Reinforced protective undercarriage, additional electronic components and super clean wiring
- F4 modular integrated flight system and on screen display
- 52 addressable RGB LEDs; each LED color can be set in software
Talk about fit and finish!
A nearly-indestructible poly-carbonate skirt and flight system pod keeps your race drone looking clean and streamlined. The addressable LED system contained inside the skirt has the ability to change colors, ensuring you’ll be seen zipping past your competition!
Built in power distribution keeps your drone looking good, without all the messy wires. Includes filtered power for all the necessary systems. RIOT’s Integrated Video Transmitter can be adjusted via you radio transmitter, and your on-screen display shows critical battery information and frequency.
Race-ready, straight out of the box…
The new RIOT 250R Pro from Thrust-UAV, an Almost-Ready-to-Fly racing drone, was inspired by racers to give the most amazing performance available from a ready-to-go package. Simply add your controls and FPV goggles, and you’re ready to launch!
The RIOT 250R Pro features a 250mm carbon fiber body and is designed to run 5-inch props, giving you the edge on the race course with the luxury of an HD camera.
An F4 processor keeps the Riot’s integrated flight system ahead of the curve, housing the features every champion loves!
The RIOT 250R Pro – Part beauty, all BEAST
ARF = Almost Ready to Fly. Required installation of a receiver prior to flight.
BNF = Bind 'N Fly. Receiver is preinstalled. The RIOT is ready to go airborne!
ARF Single RIOT package
-1 RIOT 250R Pro ARF
-2 LiPo batteries (4S)
BNF Single RIOT package w/ receiver*
-1 RIOT 250R Pro ARF
-2 LiPo batteries (4S)
-Pre-soldered PPM RX
BNF RIOT Club Pack w/ receiver*
-2 RIOT 250R Pro ARF
-4 LiPo batteries (4S)
-1 LiPo safe storage bag
-Pre-soldered PPM RXs
BNF RIOT Classroom Pack w/ receiver*
-5 RIOT 250R Pro ARF
-10 LiPo batteries (4S)
-2 LiPo safe storage bags
-2 drone backpacks
-Pre-soldered PPM RXs
* - RIOTs with pre-soldered PPM receivers are for immediate compatibility with the Taranis X9D Plus transmitter included in the Discover Drones package. You may use any other PPM transmitter of your choosing.
PCS Edventures/Thrust UAV warrants each new RIOT 250R Pro manufactured and sold to be free from defects in material, workmanship and construction, when used in accordance with the technical instruction provided, will perform to applicable specifications for a period of 30 days from the date of manufacture.
THIS WARRANTY DOES NOT APPLY TO EQUIPMENT OR GOODS WHICH ARE MISUSED, OR ABUSED, OR DAMAGED FROM INSTALLATION, OR NOT USED IN ACCORDANCE WITH SELLER’S INSTRUCTIONS. NORMAL WEAR OF EQUIPMENT OR GOODS ARE NOT INCLUDED IN THIS WARRANTY.
Equipment or goods not manufactured by the Seller but supplied through the Seller shall carry the warranty of the original manufacturer.
THE SELLER’S SOLE LIABILITY UNDER THIS WARRANTY SHALL BE LIMITED TO EITHER REPLACING OR REPAIRING WITHOUT CHARGE, AT ITS FACTORY OR ELSEWHERE AT ITS DISCRETION, ANY EQUIPMENT OR GOODS NOT MEETING THIS WARRANTY, OR AT SELLER’S OPTION, REFUNDING THE PURCHASE PRICE. THE SELLER SHALL IN NO EVENT BE LIABLE FOR ANY OTHER DIRECT OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND UNDER THIS CONTRACT OR OTHERWISE.
The warranties of the Seller do not cover, and the Seller makes no warranty with respect to any defect, failure, deficiency, or error which include but are not limited to:
(a) Not timely reported to the Seller; or
(b) Due to misapplication, modification, disassembly, abnormal conditions of temperature, dirt or corrosive matter; or
(c) Due to operation, either intentional or otherwise, above rated capacities or in an otherwise improper manner. Seller assumes no responsibility for the quality or performance of coatings, adhesives or other materials used with Seller’s equipment or goods.
If examination by PCS Edventures/Thrust UAV discloses that the product has defective components, then PCS Edventures/Thrust UAV obligation is limited to repair or replacement, at PCS Edventures/Thrust UAV option, of the defective unit(s) or its components.
PCS Edventures/Thrust UAV is not responsible for products which have been subject to misuse, alteration, accident or for repairs not performed by PCS Edventures/Thrust UAV or its authorized agents and additional charges may be incurred by the buyer for diagnostic and/or repair functions performed by PCS Edventures/Thrust UAV staff.
The foregoing warranty constitutes PCS Edventures/Thrust UAV sole liability. PCS Edventures/Thrust UAV WARRANTY CLAUSE THERE ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
PCS Edventures/Thrust UAV shall not be responsible for any incidental or consequential damages arising from any breach of warranty.
RMA POLICY In the event that a product fails, contact PCS Edventures/Thrust UAV at the telephone number below or send an email to email@example.com with the following information:
Thrust UAV 11915 West Executive Drive ~ Suite 101 ~ Boise ~ Idaho ~ 83713 (208) 297 – 6691
- Contact person and telephone number at which they can be reached.
- Name and location of where product was purchased.
- Products serial number & date of manufacture if possible, or your purchase order number.
- As complete a description of the problem. Many cases we can troubleshoot the problem and correct it by telephone, email. In some cases, we may need to replace the product under warranty. In the event that a replacement product is to be sent out, we will do so on a 1:1 replace / return policy.
NO RETURNS WILL BE ACCEPTED WITHOUT AN RMA AUTHORIZATION FROM PCS Edventures/Thrust UAV We will issue this number and RMA form to be included with the returned items. Fixtures must be returned properly packaged and free from any damage or modification in any way, with transportation charges at the expense of Customer, to PCS Edventures/Thrust UAV; return transportation charges will be F.O.B. PCS Edventures/Thrust UAV. No parts shall be returned unless a return authorization number (RMA) is received, which will be furnished upon request. Product that is damaged during the return due to inadequate packaging will not be accepted and return credit will not be issued. We recommend that all packaging on the replacement product be saved and utilized for the RMA products. All RMA returns must be specified as “Warranty Return” on all shipping documents by Customer. Any charges arising from deviance from this directive will be borne solely by Customer.
SHIPPING CHARGES Customer will pay shipping charges from PCS Edventures/Thrust UAV to customers’ delivery location.
Questions about the RIOT 250R Pro Racing Drone? Want to request a proposal for a purchase order?
Our STEM experts are here to help!